The digital controller was developed to be space-saving. Its dimensons are 96 x 96 mms and it has a switch contact. This main switch contact is sourced as signal device. The actual temperature is shown permanently while the setpoint is shown by pushing the push-button. The setting of all setpoints is adjusted by a potentiometer with ten gears...





more informations and technical datas in the pdf-sheet.

The digital controller was developed to be space-saving. Its dimensons are 96 x 96 mms and it has a switch contact. This main switch contact is sourced with PID-feedback. The actual temperature is shown permanently while the setpoint is shown by pushing the push-button. The setting of all setpoints is adjusted by a potentiometer with ten gears...





more informations and technical datas in the pdf-sheet.

The digital controller was developed to be space-saving. Its dimensons are 48 x 96 mms and it has a switch contact. This main switch contact is sourced as signal device. The actual temperature is shown permanently while the setpoint is shown by pushing the push-button. The setting of all setpoints is adjusted by a potentiometer with ten gears...





more informations and technical datas in the pdf-sheet.

The digital controller was developed to be space-saving. Its dimensons are 48 x 96 mms and it has a switch contact. This main switch contact is sourced with PID-feedback. The actual temperature is shown permanently while the setpoint is shown by pushing the push-button. The setting of all setpoints is adjusted by a potentiometer with ten gears...





more informations and technical datas in the pdf-sheet.

The controller is mountet with a digital LED for actual and setpoint temperature (push-button for switching). The LED is 11 mms high and has a resolution fo 0,1°C, 1,0°C. The accuracy is adjustable. The device is available for connection of two-wire and three-wire resistance thermometers Pt 100 and is mounted with a floating distance switch contact and with AMP-connector 6,3mm. The dimensions are 48 x 96 mms with an installation depth of 105 mms...





more informations and technical datas in the pdf-sheet.

The areas of application for (safety) temperature limiters or monitors ((S)TB or (S)TW) are to be found wherever thermal processes need to be monitored, and where the system must be set to a safe condition in the event of a fault. If the permitted temperature limit is reached or a fault occurs within the permitted temperature range (probe/cable break, short-circuit, component defect, power failure), then the instrument switches off without any delay. If the fault is no longer present, then limiters...



more informations in the PDF sheet.

The JUMO iTRON controller series comprises universal and freely programmable compact instruments for a variety of control tasks. It consists of five models, with the bezel sizes 96mm x 96mm, 96mm x 48mm in portrait and landscape format, 48mm x 48mm and 48mm x 24mm.The controllers feature a clearly readable 7-segment display which, depending on the version, is 10 or 20 mm high, for process value and setpoint indication or for dialogs. Only three keys are needed for configuration. Parameter setting...

The JUMO dTRON 300 series of controllers includes four freely programmable instruments in different DIN formats for controlling temperature, pressure and other process variables. The high-contrast, multicolor LC display for process value, setpoint and operator prompting contains two four-digit 7-segment displays, two single-character 16-segment displays, display of the active setpoints, six switch position indicators, and displays for the dimensional unit, ramp function and manual operation. Simple...